single point lubricators

Simalube automatic single point lubricators are suitable for any single point lubricating task with grease or oil, and are available in four different sizes, 30, 60, 125 and 250ml. All possible kinds of lubricating points can be lubricated 24 hours, day in, day out.
Roller bearings which are not lubricated sufficiently or wrongly, wear out long before they have reached their expected product life. Simalube lubricators guarantee a consistent supply of lubricant in the pre-adjusted proportioning. Shutdown times are decreased and costs in comparison to time-consuming lubrication by hand, are clearly reduced. Within seconds Simalube is fixed to the lubricating point. Simalube is powered by a gas producing dry cell. The gas producing dry cell builds behind the piston in the lubricator, which dispenses the lubricant automatically and evenly in the lubrication point. The amount of lubricant can be easily adjusted by means of an Allen key.The range of lubricants approved for Simalube include modern and approved high-performance lubricants, especially modified for the requirements of oil and grease lubricators. For all greases and oils, data sheets are available.


Simalube is also available with other lubricants or empty. Please contact us for advice.
Filled with oil, Simalube is applied for the automatic lubrication of chains, open gears or guide rails for example.
Simalube will convince you through its:
• Reliability
• High efficiency
• Universal use
• Refillability
• Best environmental compatibility

 

Catalogue

 


induction heaters

The perfect solution for neat, efficient mounting of bearings

Simatherm INDUCTION HEATERS

For the quick warm-up of roller bearings and other ring shaped metal parts. Thanks to the heat extension, the work piece can easily be fitted onto the shaft. In the warm up process, only the work piece is heated but the equipment itself remains cold. Simatec manufactures induction heaters for work pieces to 4000 kg. Heaters for special applications are developed on demand.

The inductive warm-up of ring shaped parts is a quick, clean and efficient method. It replaces traditional warm-up techniques such as hotplates, hot oil baths, open flames or stoves.

 

Catalogue

 

 


fitting tool

Simatool Mounting Tool

For careful mounting of roller bearings and radial shaft seals. Universal use for bearings with a bore diameter from 10 to 50 mm. Easily carried in a handy case, including a recoil-free hammer.
• 3 Impact sleeves and 33 impact rings
• No mechanical damage of the bearing
• Also suitable for the mounting of sleeves, sealing rings, pulleys etc

 

Catalogue

 

 


DRycells

The gas producing dry cell builds behind the piston in the lubricator, which dispenses the lubricant automatically and evenly in the lubrication point.

 

Multipoint lubricators

The Automatic multipoint lubrication system for small quantities of lubricant.

 

 

 

 

Catalogue